|
Post by chester on Feb 28, 2008 18:46:06 GMT
|
|
|
Post by chester on Feb 28, 2008 18:45:02 GMT
|
|
|
Post by chester on Feb 28, 2008 18:44:28 GMT
|
|
|
Post by chester on Feb 28, 2008 18:43:04 GMT
|
|
|
Post by chester on Feb 28, 2008 18:27:57 GMT
|
|
|
Post by chester on Feb 27, 2008 20:17:58 GMT
Hello alan thank you for the information i will take some picture's tomorrow and try and post them.Two more bits of information, the main shaft is 13mm and the screws are 3.5x.6mm and3x.5 mm.
|
|
|
Post by chester on Feb 25, 2008 20:20:24 GMT
I have recently been given a mill engine to try to repair as quite a few parts seem to be missing. The threads on the screws on the covers appear to be metric, it is 35mm bore and 75mm stroke.The piston rod slides on a I shaped bar and connects to a 99.5mm small flywheel. There is a eccentric to the slide valve which also has a reversing lever on it.The main shaft which has four flats filed on it is supported by two supports with a 240mm 6 spoke flywheel on the end unsupported.With it are one eccentric and one plain bush but no straps.The whole engine is of brass or gunmetal with only the nuts, bolts and keys made of steel.It is about 6inches wide and 16 inches long on a brass plate mounted on a wooden table about 4 inches high.Unfortunately i have not got a clue how to upload photo's to the site.Any help gratefully received thank you.
|
|